Samsung sph-n240, n400, a460, a500, etc Nam Programming:

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69

Samsung a300, a530, a610, a620, a660, a670, etc Nam Programming:

Nam Set: Menu, 6, *

Service Menu: Menu, 9, *

Test Mode: 47*68#13580

Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam Programming:

Nam Set: 6548#0**4#6

Nam Set: 47*869#08#9

Nam Set: 74153697193

Test Mode: 5809540*45680 (88 – efs clear)

Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415

Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415

Samsung N356 (India version) Nam Programming:

Test Mode: Menu, 5, down arrow, *

Test Mode: **00## (in some flashes)

Samsung i700, etc Nam Programming:

Nam Set: Go to start and select “PHONE” from the drop down menu, dial #83587

Samsung i300, etc Nam Programming:

1. Tap on the Phone Icon with stylus

2. Press #907*9#0 ENTER LOCK should appear on screen

3. Enter OTKSL

4. SVC MENU will appear press 1

5. Enter 10 digit MIN and then press SAVE

6. Press SAVE again

7. Press 3 and then press SAVE 6 times

8. Enter the HOME SID and press SAVE once

9. Press END key twice

TEST MODE COMMANDS:

n105_test_mode.txt

a500_test_mode.txt

a530_test_mode.txt

<>

——————————————————————————–

Qualcomm qcp-800 Nam Pogramming:

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc

Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:

Nam Set: 111111+Jog Dial(Ok), Select “Programming”+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok

Tips:

On some kyocera handsets the factory service module has not been disabled

and the phone can be programmed without the spc by inputting.

Nam Set: ##333333 menu (service)

<>

——————————————————————————–

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:

Nam Set: ##Spc+Ok+Key Down+Ok

Advanced Setup: ##3282+Ok+Key Down+Ok+Msl

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)

Sanyo scp-A011, smp-A017, etc Nam Programming:

Nam Set: F9(3 beep) + 0*72696#767

<>

——————————————————————————–

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming:

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#

Nokia 8587 Nam Programming:

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset:

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:

51xx, 61xx, 71xx, 3285, 63xx, etc:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says “Field Test” and choose SELECT

3) Highlight “Enable” and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to “Field Test” choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

“Field Test” choose SELECT. Press 0 0 and then choose OK.

3360, 6360:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says “Field Test” and choose SELECT

3) Highlight “Enable” and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to “Field Test” choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

“Field Test” choose SELECT. Press 2 1 0 0 and then choose OK.

<>

——————————————————————————–

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:

(Power the phone on and wait until the little light on top goes out)

Nam Set: 289+fcn+#+1

Service menu: fcn+00+fsc(000000)

Test Mode: Hold (2,*,Rcl)+Power

Test Mode Commands:

99 – download – flash phone

124 – inam data write

125 – version

126 – esn read

127 – sec_code

128 – lock_code

129 – is WFTV data write

137 – FSC code

138 – NPcode (nam program code)

139 – dscode

141 – restart

218 – Read_Addr

000 – is cdma mode

001 – is fm mode

002 – is pcs mode

008 – is reg read addr

020 – is lna_range

Audiovox pcx-3500xl Nam Programming:

Nam Set: ##2726+Send+1998+1+Spc+1

Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc

Audiovox 8610, 8910, etc Nam programming:

Name Set: ##847446, end, 111111

Audiovox-107 Nam Programming:

Nam Set: 45680*47*869#1

Audiovox CMP-3 Nam Programming:

Nam Set: 45680*47*869#1

Dm Mode: Menu, 6, 6

Audiovox 9950 Nam Programming:

Nam Set: ##3282

Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming:

Nam Set: m + # + envelope key + * + 1

Audiovox Thera (Toshiba 2032) Nam Programming:

Thera Nam Programming User Manual – nam_thera.pdf

AUDIOVOX TEST MODE:

9100, 9155:

1) Turn on the phone. As soon the phone comes on and the green light

turns off press RIGHTARROW, 0, 0. The phone will ask for the

“FSC Code”, press 000000 then choose OK and press RIGHTARROW,

RIGHTARROW. Your phone is now in test mode.

2) The signal strength is the number on the top right hand side of the screen.

3) To turn off test mode shut of the phone and then turn it back on.

<>

——————————————————————————–

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 74663#, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284

Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to “PrefMod”

4) RIGHT Softkey (Change) until you see “DigOnly”

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola t182, c210, etc Nam Programming:

Nam Set: ##1111 end

Nam Set: ##298645665 end

Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc – 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#

Motorola StarTac 2004 Nam Programming:

Nam Set: 5759789*#, rec key (3)times (spc – 915037)

Motorola ms200, ms230, etc Nam Programming:

Nam Set: 5759789*# (spc – 915037)

Motorola v6060 Nam Programming:

Nam Set:147*369#456*0#

MOTOROLA TEST MODE:

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to “Enter a Security Code”, press 000000, OK

3) Scroll down to “Test mode” choose SELECT. Scroll down to “Enable”

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says “DISABLE” instead of

“ENABLE” and choose select.

Motorola Bible – bible.txt

<>

——————————————————————————–

lgc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press “Sto” 3sec, 2539**

lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, Spc

A-key: 2539**

lgc-510, v111, etc Nam Programming:

Nam Set: Menu, 3, 0, Spc

A-key: 2539**

lgc-500, 800w, etc Nam Programming:

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**

Lg LX,VX-series, VX4400, VX6000, etc Nam Programming:

Nam Set: ##Spc

Nam Set: Menu, 0

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786,ok

<>

——————————————————————————–

Sky All Models Nam Programming:

Nam Set: #7583538324#626#

Nam Set: *759#364*7388464#

Min simple mode: #758353266#646#

Irm simple mode #758353266#476#

Voice memo: #8767#277#

Test Mode: #7583538324#8378#

A-key: #758353266#2539#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc

<>

——————————————————————————–

Withus wce-100, 200, 300, etc Nam Programming:

Nam Set: ##948487+Save

Nam Set: ##948482+Save

Nam Set: ##66835+Save

SMS Settings: ##76766

NVM Rebuild: ##777464

<>

——————————————————————————–

Hyundai hwp-110 Nam Programming:

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)

Hyundai hgc-120, 130, 200 Nam Programming:

Nam Set: #86904**89397#

Hyundai hgc-310, 600, 610 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

A-key: 2539**

Debug Menu: ##27732726+Pwr

Sar Test: ##27752345+Pwr

Baud Rate: ##36**+Pwr

DM Mode Enable: **1004+Pwr

DS Mode Enable: **1005+Pwr

Test Bell/Voice/Led/Dot: ##1122+Pwr

RF Mode: ##2240+Pwr

Ras Ram: ##2774+Pwr

Cmux1: **0481+Pwr

Cmux2: **0482+Pwr

RX Mode Fax: **0492+Pwr

RX Mode Data: **0491+Pwr

RX Mode Reset: **0490+Pwr

<>

——————————————————————————–

Huawei ETS-668, 678, 688, etc Nam Programming:

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu

<>

——————————————————————————–

Ericsson A1228c, T61, etc Nam Programming:

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu

Sony-Ericsson T608 Nam Programming:

Nam Set: 923885, Joystick to the right, 111111

<>

——————————————————————————–

Epsilon vc-5x Nam Programming:

Nam Set: **147258963##

Programming1: **1232580##

Programming2: **321456987##

Version: **1470963##

Debug: **000000##

Menu_1: **078987##

Menu_2: **1234756##

A-key: 2539**

Reset: **14789##

<>

——————————————————————————–

VK-100C, 110C, 200C, etc Nam Programming:

Nam Set: 153147539741593

Test Mode: 153147539123258 (88 – clear efs)

<>

——————————————————————————–

Z510, Z710i(gcd-456) Nam Programming:

Nam Set: Menu+0+Spc

<>

——————————————————————————–

AMC450 Nam Programming:

Nam Set: *74269#*748#96148063+SEL

<>

——————————————————————————–

Gtran gcp-2000 Nam Programming:

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc

Gtran gcp-5000 Nam Programming:

Debug Mode: 01#727+Spc

Test Mode: 01#765

<

>

——————————————————————————–

PANASONIC TEST MODE:

Panasonic (Most):

1) Turn on the phone. Press #7764726# choose SEND

2) Scroll down to where it says “NAM 1″ and choose OK. Scroll down

to “Access To Level 4″ choose YES. Scroll down to “Built-In-Monitor”

and choose EDIT.

3) Press 1 and choose OK then choose BACK. The phone will say

“Back To Level 1″ choose YES. Now choose EXIT the phone will ask you

“Exit And Save Change” choose YES.

4) Signal strength is the top right number on the screen.

5) To turn off the test mode follow the above sequence except press 0

instead of 1 at the “Built-In-Monitor”

<>

——————————————————————————–

Synertek S200 Nam Programming:

Nam Set: Menu+0+Spc

Debug Mode:

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

Unknown code: ##325+Save

<>

——————————————————————————–

Sony CM-M1300, 3300, Z200 Nam Programming:

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc

Related posts:

1. GPRS/MMS Settings (Ufone)